Rigid Inner Panel Anti Riot Armour in 11 Parts
This rigid inner panel anti riot armour is an 11-part riot suit whose front chest is reinforced with a stiff inner plate for limited blade resistance. Polycarbonate panels guard the shoulders, arms and legs, and the whole outer layer is fire retardant. It is made in China for police, army and security buyers.
What the 11 parts cover
The suit protects against rocks, screws and similar thrown objects across nearly the whole body. The parts run from a neck guard and a vest with groin and shoulder guards, to forearm and elbow guards, glove covers, buttock and thigh guards, and finally shin, knee and foot protection. The listed protect area is 1.08m2.
Because each part is separate, a unit can replace a damaged forearm guard without buying a new suit. We suggest adding a small stock of spare limb guards to a large order for this reason.
Why a rigid inner panel matters
Soft padding spreads a blow but does little against a blade. The inner chest plate adds a stiff layer where a stab would do the most harm, while the polycarbonate limb panels keep their shape under repeated strikes and still let the wearer move freely. Plates in this class are usually polycarbonate or high-density polyethylene over impact foam, held by hook-and-loop or buckle straps.
Test figures for the rigid inner panel anti riot armour
The manufacturer lists these results:
- A dagger at 2000N static pressure on the chest, back or groin for one minute does not pierce the suit (≥ 20J)
- A 7.5kg steel ball dropped repeatedly on the chest and arms from 163cm causes no flaw (≥ 20J)
- Chest, abdomen and groin coverage of ≥0.1, with joints rated above 2000N
We share test papers for your batch on request, and flag anything not confirmed for your order.
Export and tender supply
Importers, security contractors and tender winners buy this suit in Nigeria, Kenya, Ghana and other markets. Each order ships in seaworthy export crating with a packing list, certificate of origin and bill of lading. Our certifications and compliance documents page shows how we handle tender clauses.
Compare other riot suits
For a lighter crowd control set, see the 8-9 kg riot police armor. The quick donning doffing body armor is built for fast call-outs, and all suits are listed under army equipment.
| Category | Army Equipment |
| Sub-category | Anti Riot Armour |
| Power / Mechanism | Segmented panel construction with hook-and-loop or buckle body straps * |
| Build Material | High-density polyethylene or polycarbonate plates over impact-foam padding * |
| Capacity / Size | Stab, blunt-impact and fragment protection to typical riot-control duty levels * |
| Protect Area | 1.08m2 |
| back | ≥0.1 |
| Arms | ≥0.18 |
| Legs | ≥0.30 |
| Velcro | >7.2N/cm2 |
| Buckle | >500N |
| Joints | >2000N |
| Availability | In stock / Made to order |
| Export Packaging | Seaworthy export crating available |
| Warranty | As per manufacturer terms — confirm at enquiry |
* Typical value for this type of equipment, not an exact datasheet figure for one specific unit — confirm the precise specification for your order at enquiry.
Compare
How this compares to similar Army Equipment products
| Model | Automation / Power | Material | Capacity |
|---|---|---|---|
| Army Rigid Inner Panel Anti Riot Armour Anti - Wallop In The Key Parts Highly Safety (this page) | Segmented panel construction with hook-and-loop or buckle body straps | High-density polyethylene or polycarbonate plates over impact-foam padding | Stab, blunt-impact and fragment protection to typical riot-control duty levels |
| Army 8-9 KGS Riot Police Armor Fire Stab And Impact Protection For Crowd Control | Segmented panel construction with hook-and-loop or buckle body straps | High-density polyethylene or polycarbonate plates over impact-foam padding | Stab, blunt-impact and fragment protection to typical riot-control duty levels |
| Army ABS And PC Plastic Anti Riot Armour Hard Shell With Foam Inner Padding | Segmented panel construction with hook-and-loop or buckle body straps | Plastic | Stab, blunt-impact and fragment protection to typical riot-control duty levels |
| Army Flame Resistance Body Anti Riot Armour Full Body Armor With T Baton | Segmented panel construction with hook-and-loop or buckle body straps | High-density polyethylene or polycarbonate plates over impact-foam padding | Stab, blunt-impact and fragment protection to typical riot-control duty levels |
You may also need
Related products
Army 8-9 KGS Riot Police Armor Fire Stab And Impact Protection For Crowd Control
View details →
Army ABS And PC Plastic Anti Riot Armour Hard Shell With Foam Inner Padding
View details →
Army Flame Resistance Body Anti Riot Armour Full Body Armor With T Baton
View details →
Army Free Size Riot Gear Body Armor , Black Military Body Armor With T Baton
View details →Buyer FAQs
Questions about the Army Rigid Inner Panel Anti Riot Armour Anti - Wallop In The Key Parts Highly Safety
Yes — capacity, power specification and accessories for the Army Rigid Inner Panel Anti Riot Armour Anti - Wallop In The Key Parts Highly Safety can typically be configured to your requirement. Share your target output and destination country when you enquire.
Export orders are supplied with seaworthy packaging, shipment documentation and, where applicable, an operating manual. Installation and after-sales terms are confirmed at order stage.
We currently ship equipment in this range to 67+ countries spanning Africa, Asia, the Middle East and Latin America — tell us your destination when you enquire.
Yes. For tender and bulk institutional orders of the Army Rigid Inner Panel Anti Riot Armour Anti - Wallop In The Key Parts Highly Safety, we quote against the exact technical specification in your tender document and align production and dispatch with your award timeline.