Garage Dent Pulling Machine and Mini Spotter
The Garage Dent Pulling Machine and Mini Spotter is a compact stud welder for car body repair. It welds a pulling stud or washer to a dented steel panel so the dent can be drawn out, then the stud is removed. This model takes a 6.8 KVA input, delivers up to 2700 A, and runs on 220V or 380V at 50/60Hz.
Key data of this dent pulling machine and mini spotter
The specification table below lists the confirmed figures. In short:
- Input current: 54A on 220V or 18A on 380V
- Output voltage: 1-13V, with a peak of 2700A
- Welding time: 0-99s, set on an electronic timer
- Size: compact, for easy moves around the shop
A chip control system sets the weld values. The operator picks the current that matches the panel thickness, and the unit takes care of the rest. A gun test function helps check the state of the welder before a job.
Typical use in the body shop
Spotters of this kind typically handle steel body panels of 0.5-2mm, which covers most car doors, wings and roof skins. Units in this class usually have a steel transformer or inverter core and copper welding cables, with manual trigger control and a digital weld-time setting. These points are typical for the type and are confirmed at quotation.
Optional work modes include shrinking, direct pulling, spot welding, flattening, waveform wire, stud welding and OT, triangle or plain washers. Buyers usually ask us which of these modes to include, so tell us the repair work your shop does most.
Safety and set-up
The unit draws a high current, so it needs a correctly rated supply and earth. Tell us your mains voltage before we build the order. Welders should wear eye and hand protection, and general guidance is given in the OSHA hand and power tools safety pages.
Related body shop tools
Shops that handle frame damage often add a car body repair system. A garage workshop air compressor is also useful for sanding and spray work. The wider range of Garage Equipment is on our garage workshop equipment page.
Supply for export and tenders
We make this dent pulling machine and mini spotter in China and ship it to Bahrain, Kuwait, Cambodia and beyond, for importers and government tender winners alike. We confirm the voltage, work modes, Incoterm and delivery date before production starts. Send your quantity and port, and we will quote with a written lead time.
| Category | Garage Equipment |
| Sub-category | Garage Body Shop Equipments |
| Automation Level | Manual trigger control with digital weld-time setting * |
| Power / Mechanism | Capacitor-discharge welder fuses a pulling stud to the panel for pulling * |
| Build Material | Steel transformer/inverter unit, copper welding cables * |
| Capacity / Size | Handles 0.5-2mm steel body panels * |
| Application | Compact |
| Input voltage | 220V/ 380V ;50/60Hz |
| Input power | 6.8KVA |
| Input current | 54A/18A |
| MAX | 2700A |
| Output voltage | 1-13V |
| Operation way | Electronic timer continuously |
| Welding time | 0-99s |
| Availability | In stock / Made to order |
| Export Packaging | Seaworthy export crating available |
| Warranty | As per manufacturer terms — confirm at enquiry |
* Typical value for this type of equipment, not an exact datasheet figure for one specific unit — confirm the precise specification for your order at enquiry.
Compare
How this compares to similar Garage Equipment products
| Model | Automation / Power | Material | Capacity |
|---|---|---|---|
| Garage Dent Pulling Machine and Mini Spotter (this page) | Manual trigger control with digital weld-time setting | Steel transformer/inverter unit, copper welding cables | Handles 0.5-2mm steel body panels |
| Garage Car Body Repair System | Hydraulic pump with manual chain/clamp positioning | Heavy steel base frame, hydraulic tower, chains and clamps | 5-10 tonnes pulling force |
| Garage Workshop Air Compressor | Automatic pressure-switch start/stop | Steel receiver tank, cast-iron pump, powder-coated frame | 2-10 HP, 100-500 litre tank, 8-12 bar working pressure |
| Garage Workshop Digital Air Inflators | Automatic digital pressure set-and-cut-off | Steel/ABS console, reinforced air hose, digital display | 0-12 bar (0-174 psi) digital pressure setting |
You may also need
Related products
Garage Car Body Repair System
View details →
Garage Workshop Air Compressor
View details →
Garage Workshop Digital Air Inflators
View details →
Garage Workshop Gas Analyzer
View details →Buyer FAQs
Questions about the Garage Dent Pulling Machine and Mini Spotter
Yes — capacity, power specification and accessories for the Garage Dent Pulling Machine and Mini Spotter can typically be configured to your requirement. Share your target output and destination country when you enquire.
Export orders are supplied with seaworthy packaging, shipment documentation and, where applicable, an operating manual. Installation and after-sales terms are confirmed at order stage.
This product is available for export to 67+ countries across Africa, Asia, the Middle East and Latin America. Confirm your destination when requesting a quote.
Yes — the Garage Dent Pulling Machine and Mini Spotter is regularly supplied against government, municipal and institutional tenders. Share the tender's technical specification, required quantity and delivery date, and we'll confirm compliance paperwork and a dispatch schedule that meets your submission deadline.