Construction 18m3 Garbage Compactor Trucks
Construction 18m3 Garbage Compactor Trucks are large refuse trucks with an 18-20 m3 body, a rated loading of 11000 kgs and a 155 kw engine. A hydraulic packer presses waste into the body, so each round collects far more than an open tipper. They sit in our Municipal and Special Vehicle range, part of the Construction Machinery catalogue.
Stated data for this model
The maker lists these figures for the truck:
- Rated loading: 11000 kgs
- Tank capacity: 18-20 M3
- Engine power: 155 kw
These three points set it apart from the smaller trucks in our range. A body this size suits busy city routes, big markets and transfer runs where a smaller truck would need extra trips to the tip.
How the packer works
Crews tip bins or bags into the rear hopper. A packer blade then sweeps the load forward and presses it hard against the waste already inside. The packer runs off the truck engine through a PTO (power take-off). At the tip, the load is pushed out by an ejector plate or dumped by raising the body.
Typical build points
The specification table below covers the full data. Typical items show what this truck type usually has:
- Controls: PTO-driven hydraulic packer, driver controlled
- Mechanism: hydraulic packer-blade compaction mechanism
- Body: steel compaction body, wear-resistant packer plate
- Range: this truck type spans 5-20 m³ compacted payload capacity
Buying 18m3 Garbage Compactor Trucks for a tender
Send the award's spec and deadline, and we match the build, the compliance papers and a dispatch date. Buyers usually ask us about drive side, bin lifter type and chassis brand. For narrower streets, compare the 13m3 garbage compactor truck. We build in China, ship to Nigeria, Kenya, Ghana and 60+ other countries, and quote per order and port, as set out on our shipping and export documents page.
| Category | Construction Machinery |
| Sub-category | Municipal and Special Vehicle |
| Automation Level | PTO-driven hydraulic packer, driver controlled * |
| Power / Mechanism | Hydraulic packer-blade compaction mechanism * |
| Build Material | Steel compaction body, wear-resistant packer plate * |
| Capacity / Size | 5-20 m³ compacted payload capacity * |
| Rated Loading | 11000 kgs |
| Tank Capacity | 18-20 M3 |
| Engine Power | 155 kw |
| Availability | In stock / Made to order |
| Export Packaging | Seaworthy export crating available |
| Warranty | As per manufacturer terms — confirm at enquiry |
* Typical value for this type of equipment, not an exact datasheet figure for one specific unit — confirm the precise specification for your order at enquiry.
Compare
How this compares to similar Construction Machinery products
| Model | Automation / Power | Material | Capacity |
|---|---|---|---|
| Construction 18m3 Garbage Compactor Trucks (this page) | PTO-driven hydraulic packer, driver controlled | Steel compaction body, wear-resistant packer plate | 5-20 m³ compacted payload capacity |
| Construction 12000L Sewage Vacuum Suction Trucks | PTO-driven vacuum pump, driver controlled | Corrosion-resistant steel tank | 5,000-18,000 litre tank capacity |
| Construction 12m3 Garbage Compactor Trucks | PTO-driven hydraulic packer, driver controlled | Steel compaction body, wear-resistant packer plate | 5-20 m³ compacted payload capacity |
| Construction 13.5m Aerial Working Trucks | Hydraulic telescopic/articulated boom, basket controls | High-tensile steel boom, steel work platform | 14-24 m platform working height |
You may also need
Related products
Construction 12000L Sewage Vacuum Suction Trucks
View details →
Construction 12m3 Garbage Compactor Trucks
View details →
Construction 13.5m Aerial Working Trucks
View details →
Construction 13m3 Garbage Compactor Trucks
View details →Buyer FAQs
Questions about the Construction 18m3 Garbage Compactor Trucks
Yes — capacity, power specification and accessories for the Construction 18m3 Garbage Compactor Trucks can typically be configured to your requirement. Share your target output and destination country when you enquire.
Orders shipped for export include export-grade packaging and the paperwork needed for customs clearance, plus an operating manual where relevant. After-sales and installation terms are agreed when you place the order.
We currently ship equipment in this range to 67+ countries spanning Africa, Asia, the Middle East and Latin America — tell us your destination when you enquire.
Yes. For tender and bulk institutional orders of the Construction 18m3 Garbage Compactor Trucks, we quote against the exact technical specification in your tender document and align production and dispatch with your award timeline.